Available with or without locking handles, ball valves are rated 600 WOG to 2” and 400 WOG in larger sizes. Brass ball is chrome plated. All valves are full port.
Separate parts provide unique, quick coupling hose connections for liquids or solids. All parts are manufactured to meet or exceed MIL Spec C27487 and dimensionally conform to MIL Spec A-A-59326A. They will interchange with couplings manufactured to the same standards (excluding 1/2" and 8"). Female couplers are supplied with safety pins. Cam Arms on all couplings, where required, are stainless steel. Brass Cam Arms are available.
This new cam-lock employs a patented design that relies on two bands of rubber that act as a type of gasket surrounding two specific grooves on the cam-lock shank. When the hose wall is compressed against the bands of rubber, a preventive barrier is formed reducing the chance for leaks around the couplings.
Threaded couplings for suction or discharge of water or other fluids. Standard threading is NPSM; National Pipe Straight Hose. 1 1/2" and 2 1/2" are available with additional NST thread; American National Fire Hose Straight Thread. (NST does not interchange). Pin lugs are on all sizes of female end. 2 1/2" through 6" have pin lugs on male end.
Used to connect air lines from compressors or other air source to all types of pneumatic tools and equipment. All 2 lug head connections are of one size for easy interchange. Hose shank or threaded end is coupling size. Male and Female threads are NPT. Malleable iron plated. (European style universals available special order.)
An all purpose coupling, the female ground joint consists of a MALE STEM, WING NUT and FEMALE SPUD. The female spud has NPT threads to accept the NPT threads of a rigid connection or male NPT nipple. Widely used for air, water or steam, the ground joint is secured with an interlocking clamp.
By replacing the female spud of a ground joint coupling with a double or male spud, hose to hose ground joint connections or hose to rigid connections are simplified. Double spuds for hose to hose connections are threaded NPS MALE x NPS MALE. (GJ wing nut is also NPS). For hose to rigid connection, the male spud is threaded NPS MALE x NPT MALE.
There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum, brass, or ductile iron.
