Jason Industrial, Inc., A Megadyne Group Company - 7510 Series Female Swivel SAE 45 Degree Flare Couplings

Unit of Measure

Items	7510-0404 7510 Series 1.94 Inch (in) Overall Length (A) Female Swivel SAE 45 Degree Flare Coupling	7510-0505 7510 Series 2.08 Inch (in) Overall Length (A) Female Swivel SAE 45 Degree Flare Coupling	7510-0606 7510 Series 2.34 Inch (in) Overall Length (A) Female Swivel SAE 45 Degree Flare Coupling	7510-0808 7510 Series 2.84 Inch (in) Overall Length (A) Female Swivel SAE 45 Degree Flare Coupling	7510-1010 7510 Series 3.06 Inch (in) Overall Length (A) Female Swivel SAE 45 Degree Flare Coupling
Brands	N/A Jason
Descriptive Part Number	N/A JFR5FA-04-04	N/A JFR5FA-05-05	N/A JFR5FA-06-06	N/A JFR5FA-08-08	N/A JFR5FA-10-10
Thread Size	N/A 7/16-20	N/A 1/2-20	N/A 5/8-18	N/A 3/4-16	N/A 7/8-14
Hose ID	N/A 3/16 in4.8 mm	N/A 1/4 in6.4 mm	N/A 5/16 in7.9 mm	N/A 13/32 in10.3 mm	N/A 1/2 in12.7 mm
Overall Length (A)	N/A 1.94 in49.3 mm	N/A 2.08 in52.8 mm	N/A 2.34 in59.4 mm	N/A 2.84 in72.1 mm	N/A 3.06 in77.7 mm
Cut-Off Length (B)	N/A 0.83 in21.1 mm	N/A 0.94 in23.9 mm	N/A 1.02 in25.9 mm	N/A 1.14 in29.0 mm	N/A 1.17 in29.7 mm
Hex Size (H1)	N/A 0.56 in14.2 mm	N/A 0.63 in16.0 mm	N/A 0.75 in19.1 mm	N/A 0.87 in22.2 mm	N/A 1.00 in25.4 mm
Hex Size (H2)	N/A 0.56 in14.2 mm	N/A 0.63 in16.0 mm	N/A 0.75 in19.1 mm	N/A 0.87 in22.2 mm	N/A 1.00 in25.4 mm
Weight	N/A 0.04 kg0.09 lb	N/A 0.05 kg0.12 lb	N/A 0.08 kg0.18 lb	N/A 0.12 kg0.27 lb	N/A 0.19 kg0.41 lb
Seat Angle	N/A 45 º
Industry Standards	N/A SAE
Connection Type	N/A Female Flared
Features	N/A Swivel
Warning	N/A This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
Note	N/A Standard Pack is 1. We disclaim any liability for use of our products in applications other than which they are designed. Only approved field attachable (reusable) screw together couplings can be used on this hose for compliance with DOT FMVSS 106 requirements. No crimp couplings may be used on any airbrake hose without the end assembler testing, registering and complying with DOT.