Jason Industrial
Jason Industrial
221 S Westgate Dr.
Carol Stream, IL 60188
Phone: (973) 227-4904
Website: www.jasonindustrial.com
Print Back
Construction: Tube and cover are EPDM. Reinforcement is a two-ply synthetic fabric with a wire helix.

Application: Used for applications where full suction is required. Great for applications handling crude oil, salt and fresh water, tank bottoms and diesel fuels.

Features:
  • Weather and abrasion resistant
  • All sizes are full vacuum
4418 Crude Oil Waste Pit Suction Hose
Unit of Measure
Items 4418 Crude Oil Waste Pit Suction Hose
4418-0150-100
1-1/2" I.D.
4418 Crude Oil Waste Pit Suction Hose 		4418 Crude Oil Waste Pit Suction Hose
4418-0200-100
2" I.D.
4418 Crude Oil Waste Pit Suction Hose 		4418 Crude Oil Waste Pit Suction Hose
4418-0300-100
3" I.D.
4418 Crude Oil Waste Pit Suction Hose 		4418 Crude Oil Waste Pit Suction Hose
4418-0400-100
4" I.D.
4418 Crude Oil Waste Pit Suction Hose 		4418 Crude Oil Waste Pit Suction Hose
4418-0600-100
6" I.D.
4418 Crude Oil Waste Pit Suction Hose
Description N/A Construction: Tube and cover are EPDM. Reinforcement is a two-ply synthetic fabric with a wire helix.

Application: Used for applications where full suction is required. Great for applications handling crude oil, salt and fresh water, tank bottoms and diesel fuels.

Features:
  • Weather and abrasion resistant
  • All sizes are full vacuum
Inside Diameter
(I.D.) 		N/A 1-1/2 in38.10 mm N/A 2 in50.80 mm N/A 3 in76.20 mm N/A 4 in101.60 mm N/A 6 in152.40 mm
Outside Diameter
(O.D.) 		N/A 2.01 in51.00 mm N/A 2.50 in63.50 mm N/A 3.56 in90.50 mm N/A 4.57 in116.00 mm N/A 6.61 in168.00 mm
Reinforcement Plies N/A 2 Synthetic
Maximum Working
Pressure at 68 ºF1 		N/A 10.35 bar150 psi
Vacuum at 68 ºF N/A 29.0 inHg
Minimum Bend Radius (MBR) N/A 5.30 in135.00 mm N/A 7.90 in200.00 mm N/A 13.40 in340.00 mm N/A 17.70 in450.00 mm N/A 26.80 in680.00 mm
Weight N/A 0.77 lbs/ft1.15 kg/m N/A 0.99 lbs/ft1.47 kg/m N/A 1.76 lbs/ft2.62 kg/m N/A 2.29 lbs/ft3.42 kg/m N/A 4.69 lbs/ft7.00 kg/m
Standard Length N/A 100 ft
Temperature Range N/A -40 to +66 ºC-40 to +150 ºF
Tube Material N/A Ethylene Propylene Diene Monomer (EPDM)
Cover Material N/A Ethylene Propylene Diene Monomer (EPDM)
Branding N/A Jason logo 4418 CRUDE OIL WASTE PIT SUCTION WP 150 Pounds per Square Inch (psi) 10.35 BAR.
Red mylar longitudinal stripe.
Design Factor N/A 3:1
Applications N/A Used for applications where full suction is required. Great for applications handling crude oil, salt and fresh water, tank bottoms and diesel fuels.
Construction N/A Tube and cover are EPDM. Reinforcement is a two-ply synthetic fabric with a wire helix.
Features N/A
  • Weather and abrasion resistant.
  • All sizes are full vacuum.
Note N/A All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.
Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice.
For In-Plant or Tank Truck Use to Transfer Petroleum Products.
California Proposition 65 Information N/A   This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • 1 Working pressure is temperature dependent.