Jason Industrial
Jason Industrial
221 S Westgate Dr.
Carol Stream, IL 60188
Phone: (973) 227-4904
Website: www.jasonindustrial.com
Print Back
Handles fold over top of cap. Hole provided for padlock or seal. Padlock or seal not furnished.
Unit of Measure

Specifications

Size

 N/A 2-1/2 in
Maximum Working Pressure1 N/A 150 psi

Material

 N/A Stainless Steel

Handle Material

 N/A Stainless Steel

Gasket Material

 N/A Nitrile Butadiene Rubber (NBR)

Markets Served

 N/A Air Chemical Food Material Handling Mining Petroleum (Including Fracking) Steam Water

Industry Standards

 N/A ASTM A666 304 ASTM A666 316

Material Specifications

Material Specifications

 N/A
  • Coupling body material meets ASTM A666 304 stainless steel specifications.
  • 304 Type stainless steel handles, safety pins and rings.
  • Gaskets are nitrile.
  • Coupling body material meets ASTM A666 316 stainless steel specifications.

Material Features

Material Features

 N/A
  • Sizes 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4" and 6" are manufactured to comply with Mil Spec A-A-59326A. They will interchange with any coupling manufactured to the same standard.
  • Size 5" complies to an ASTM spec. It will interchange to any other coupling manufactured to the same spec.
  • The 1/2" size is not specified to any Mil spec.
  • With the exception of the 1/2" size, all other sizes are supplied with safety pins, which will prevent disconnection during use.
  • Chemical composition of the alloy is analyzed on every melt.
  • Especially capable for chemical and food applications.

Note

Note

 N/A All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.

California Proposition 65 Information

California Proposition 65 Information

 N/A   Brass products can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • 1 Metal coupling pressures are based on ambient temperature (+70 ºF or +21 ºC) with standard NBR gasket.