Jason Industrial
Jason Industrial
221 S Westgate Dr.
Carol Stream, IL 60188
Phone: (973) 227-4904
Website: www.jasonindustrial.com
Print Back
Combination Nipples are used in a variety of fluid applications. End (male) threads are NPT Will mate with Foot Valves, Strainers, Cam & Groove Part A & D, etc. and are the same size as the shank.
Unit of Measure

Specifications

Size

 N/A 6 in

Stem Outside Diameter
(O.D.)

 N/A 6.05 in153.6 mm

Combination Hose Nipple Material

 N/A Plated Steel

Additional Information

Additional Information

 N/A Jason Ferrules and Sleeves are designed to be used with Jason Combination Hose Nipples and the Part "C" and "E" Cam & Groove fittings (crimp style only).

Working pressures are determined by the type of hose and coupling used in the application.

Do not mix with other products.

Note

Note

 N/A All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.
For any hose with a natural rubber tube, we recommend using a ferrule only. During the crimping process, couplings have a tendency to be squeezed out of proper crimp position if a crimp sleeve is being used.

California Proposition 65 Information

California Proposition 65 Information

 N/A   Brass products can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/