Inside Diameter
|
N/A 4 in101.60 mm |
Outside Diameter
|
N/A 4.80 in121.92 mm |
Reinforcement Braids |
N/A 1 |
Maximum Working Pressure at 68 ºF1 |
N/A 4.48 bar65 psi |
Vacuum at 68 ºF |
N/A 29.9 inHg |
Minimum Bend Radius (MBR) |
N/A 8.00 in203.20 mm |
Weight |
N/A 2.16 lbs/ft3.21 kg/m |
Standard Length |
N/A 100 ft |
Temperature Range |
N/A -23 to +60 ºC-10 to +140 ºF |
Tube Material |
N/A Blend Nitrile Butadiene Rubber (NBR) Polyvinyl Chloride (PVC) |
Reinforcement Material |
N/A Polyester |
Reinforcement |
N/A Polyester Yarn with Sturdy PVC Helix |
Applications |
N/A Used to deliver gasoline, diesel fuel, kerosene and fuels with aromatic content to 40%. |
Design Factor |
N/A 3:1 |
Construction |
N/A NBR/PVC tube, smooth bore with embedded SΩ ground wire in the hose wall with a sturdy clockwise PVC helix, one braid of high tensile polyester yarn reinforcement. |
Features |
N/A
|
Note |
N/A
Use JASON ORANGE banding sleeves only when securing coupling for 3" and 4" ID's.. Discharge pressures and vacuum are temperature dependent. We disclaim any liability for use of our products in applications other than which they are designed. All sizes may not be stocked in all locations Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice. For In-Plant or Tank Truck Use to Transfer Petroleum Products. SΩ = Safety Ohm |
California Proposition 65 Information |
N/A This product can expose you to chemicals including DINP, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/ |