Inside Diameter
|
N/A 1-1/2 in38.10 mm |
Outside Diameter
|
N/A 2.01 in51.00 mm |
Reinforcement Plies |
N/A 2 Synthetic |
Maximum Working Pressure at 68 ºF1 |
N/A 10.35 bar150 psi |
Vacuum at 68 ºF |
N/A 29.0 inHg |
Minimum Bend Radius (MBR) |
N/A 5.30 in135.00 mm |
Weight |
N/A 0.77 lbs/ft1.15 kg/m |
Standard Length |
N/A 100 ft |
Temperature Range |
N/A -40 to +66 ºC-40 to +150 ºF |
Tube Material |
N/A Ethylene Propylene Diene Monomer (EPDM) |
Cover Material |
N/A Ethylene Propylene Diene Monomer (EPDM) |
Branding |
N/A
Jason logo 4418 CRUDE OIL WASTE PIT SUCTION WP 150 Pounds per Square Inch (psi) 10.35 BAR. Red mylar longitudinal stripe. |
Design Factor |
N/A 3:1 |
Applications |
N/A Used for applications where full suction is required. Great for applications handling crude oil, salt and fresh water, tank bottoms and diesel fuels. |
Construction |
N/A Tube and cover are EPDM. Reinforcement is a two-ply synthetic fabric with a wire helix. |
Note |
N/A
All sizes may not be stocked in all locations. We disclaim any liability for use of our products in applications other than which they are designed. Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice. For In-Plant or Tank Truck Use to Transfer Petroleum Products. |
California Proposition 65 Information |
N/A This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/ |