Print Back
Construction: Tube is ultra-high molecular weight polyethylene (UHMWPE). Cover is CR, smooth and black. Reinforcement is a two-ply synthetic fabric with a dual wire helix and two conductive copper wires.

Application: For the suction and discharge of bio-diesel and ethanol blended fuels.

Features:
  • UHMWPE gives maximum resistance to today's bio-fuels
  • Cover is resistant to weathering and abrasion
  • Heat and ozone resistant
  • Dual conductive copper wires makes it easy to ground the hose
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
  • All sizes are full vacuum
Unit of Measure

Specifications

Inside Diameter
(I.D.)

N/A 1 in25.40 mm

Outside Diameter
(O.D.)

N/A 1.42 in36.00 mm

Reinforcement Plies

N/A 2 Synthetic
Maximum Working
Pressure at 68 ºF1
N/A 10.35 bar150 psi

Vacuum at 68 ºF

N/A 29.0 inHg

Minimum Bend Radius (MBR)

N/A 6.00 in152.40 mm

Weight

N/A 0.49 lbs/ft0.73 kg/m

Standard Length

N/A 100 ft

Temperature Range

N/A -35 to +80 ºC-31 to +176 ºF

Tube Material

N/A Ultra-High Molecular Weight Polyethylene (UHMWPE)

Cover Material

N/A Chloroprene Rubber (CR)

Cover Color

N/A Black

Branding

N/A Jason logo 4423 BIO-DIESEL B-20 MAX ETHANOL E-20 MAX SUCTION 150 PSI 10.35 BAR.
Red mylar longitudinal stripe

Design Factor

N/A 3:1

Applications

N/A For the suction and discharge of bio-diesel and ethanol blended fuels.

Construction

Construction

N/A Tube is ultra-high molecular weight polyethylene (UHMWPE). Cover is CR, smooth and black.
Reinforcement is a two-ply synthetic fabric with a dual wire helix and two conductive copper wires.

Features

Features

N/A
  • UHMWPE gives maximum resistance to today's bio-fuels
  • Cover is resistant to weathering and abrasion
  • Heat and ozone resistant
  • Dual conductive copper wires makes it easy to ground the hose
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
  • All sizes are full vacuum

Note

Note

N/A Consult with engine manufacturers for warranted blends (B-5 to B-100 & E-5 to E-100).
All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.
Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice.
For In-Plant or Tank Truck Use to Transfer Petroleum Products.

California Proposition 65 Information

California Proposition 65 Information

N/A   This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • 1 Working pressure is temperature dependent.