Print Back
Construction: Tube is nitrile, black and smooth, ARPM Class A. Cover is NBR/PVC, black, ARPM Class B. Reinforcement is a two-ply synthetic fabric with a dual wire helix.

Application: For the transfer of petroleum products, including gasoline under pressure or gravity flow (suction or discharge).

Features:
  • HD construction that handles up to 400 psi applications
  • Cover is resistant to weathering and abrasion
  • Heat, sea water and ozone resistant
  • All sizes are full vacuum
  • Construction is with high tensile strength textile
  • Dual copper wires to ground the hose
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
Unit of Measure

Specifications

Inside Diameter
(I.D.)

N/A 4 in101.60 mm

Outside Diameter
(O.D.)

N/A 4.92 in124.50 mm

Reinforcement Plies

N/A 2 Synthetic Fabric
Maximum Working
Pressure at 68 ºF1
N/A 27.56 bar400 psi

Vacuum at 68 ºF

N/A 29.0 inHg

Minimum Bend Radius (MBR)

N/A 30.00 in762.00 mm

Weight

N/A 3.85 lbs/ft5.72 kg/m

Standard Length

N/A 200 ft

Temperature Range

N/A -35 to +80 ºC-31 to +176 ºF

Tube Material

N/A Nitrile

Tube Color

N/A Black

Cover Material

N/A Nitrile Butadiene Rubber (NBR) Polyvinyl Chloride (PVC)

Cover Color

N/A Black

Industry Standards

N/A Cover - ARPM Class B Tube - ARPM Class A

Branding

N/A Jason logo 4424 PETROLEUM SUCTION WP 400 PSI 27.6 BAR.
Red mylar longitudinal stripe.

Design Factor

N/A 3:1

Applications

N/A For the transfer of petroleum products, including gasoline under pressure or gravity flow (suction or discharge).

Construction

Construction

N/A Tube is nitrile, black and smooth, ARPM Class A. Cover is NBR/PVC, black, ARPM Class B. Reinforcement is a two-ply synthetic fabric with a dual wire helix.

Features

Features

N/A
  • HD construction that handles up to 400 psi applications
  • Cover is resistant to weathering and abrasion
  • Heat, sea water and ozone resistant
  • All sizes are full vaccum
  • Construction is with high tensile strength textile
  • Dual copper wires to ground the hose
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.

Note

Note

N/A All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.
Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice.
For In-Plant or Tank Truck Use to Transfer Petroleum Products.

California Proposition 65 Information

California Proposition 65 Information

N/A   This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • 1 Working pressure is temperature dependent.