Jason Industrial, Inc., A Megadyne Group Company - Double Sided Timing Belts

Neoprene fiberglass reinforced

Double sided belts afford power transmission from either side of the belt and are often used in reversing and serpentine applications.

They are specified the same way as timing belts except with a "D" prefix. For example: D240H100. Special widths are cut to order from our sleeve stock for fast delivery.

Double sided timing belts are produced using the same materials as single sided belts, except that the backside is ground from a fiber reinforced special rubber compound. There is no nylon facing on the backside. Power take off on the backside is limited to 50% of the total catalog rating.

Total belt rating is the same as for single sided belts.

Teeth with nylon facing should always be against driver pulley.

Unit of Measure

Items	D124L-050 3/8-(in) (L) Pitch Dual Timing Belt	D124L-075 3/8-(in) (L) Pitch Dual Timing Belt	D124L-100 3/8-(in) (L) Pitch Dual Timing Belt	D150L-050 3/8-(in) (L) Pitch Dual Timing Belt	D150L-075 3/8-(in) (L) Pitch Dual Timing Belt
Belt Length	N/A 12.4 in	N/A 12.4 in	N/A 12.4 in	N/A 15.0 in	N/A 15.0 in
Pitch Code	N/A L
Width	N/A 0.50 in	N/A 0.75 in	N/A 1.00 in	N/A 0.50 in	N/A 0.75 in
No. of Teeth	N/A 33	N/A 33	N/A 33	N/A 40	N/A 40
Approx. Weight	N/A 0.03 lb	N/A 0.05 lb	N/A 0.06 lb	N/A 0.04 lb	N/A 0.06 lb
California Proposition 65 Information	N/A This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/