UniMatch SP Series Metric V-Belts
unimatch-sp-series-metric-v-belts
Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 13 mm to pitch length for outside length.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 18 mm to pitch length for outside length. Additional sizes available to SPAS080.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 22 mm to pitch length for outside length. Additional sizes available to SPB13700.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 30 mm to pitch length for outside length. Additional sizes available to SPC13700.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
SPZ Section Metric V-Belts (9.7mm Top Width, 8mm Thick)
(142) Oil and heat-resistant. Static dissipating.Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 13 mm to pitch length for outside length.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
SPA Section Metric V-Belts (12.7mm Top Width, 10mm Thick)
(129) Oil and heat-resistant. Static dissipating.Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 18 mm to pitch length for outside length. Additional sizes available to SPAS080.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
SPB Section Metric V-Belts (16.3mm Top Width, 13mm Thick)
(78) Oil and heat-resistant. Static dissipating.Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 22 mm to pitch length for outside length. Additional sizes available to SPB13700.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
SPC Section Metric V-Belts (22mm Top Width, 18mm Thick)
(35) Oil and heat-resistant. Static dissipating.Built to European standards DIN 7753, AFNOR T47-117, BS 3790 and ISO 4184. SP series V-belts were the forerunners of the RMA deep wedge, high capacity V-belt sections. These deep-wedge belts (38°) allow for more power, high speed ratios, smaller center distances and more compact drives. They are replacement belts for many imported machines and for machinery built for export.
These V-belts also have the UniMatch feature. This eliminates belt set matching with its multiple stocking problems.
Non-standard lengths are available on special order.
Metric V-belts are specified by letters showing the SP section and numbers giving the pitch length in millimeters.
For example: SPA 850.
NOTE : Belt sizes to 2240 mm in length are also available in raw edge construction. These belts are designated by an X prefix rather than S. For example: XPB1400. For Raw Edge Construction, add 25% to list price.
Although metric V-belts are ordered by section and pitch length, they are sometimes labeled with the section letters, belt length in millimeters and the letters LA (approx. length), LI (inside length) or LW (pitch length).
Add 30 mm to pitch length for outside length. Additional sizes available to SPC13700.
For notched construction add 25% to the list price. /Asset/Unimatch-SP-Series-Metric-V-Belts-SPZ--SPA--SPB--SPC.jpg
