Construction: Tube is a hydraulic oil mist resistant, high heat synthetic rubber. Cover is EPDM, yellow, pin-pricked. Reinforcement is a two-spiral wire.

Application: For heavy-duty air supply where high temperature is required. For use with high-temperature compressors without an after-cooler, mining, quarries, construction, industrial air placement, sandblasting, and heavy-duty equipment.

Features:
  • Hydraulic oil resistant tube
  • Bright yellow non-marking cover
  • High working pressure
  • Extreme heat resistance
  • Abrasion and ozone resistant
Request Information
Unit of Measure
Items
4807 Hi-Temp Air Hose - Wire Reinforced

3/4" I.D.
4807 Hi-Temp Air Hose - Wire Reinforced
4807 Hi-Temp Air Hose - Wire Reinforced

3/4" I.D.
4807 Hi-Temp Air Hose - Wire Reinforced
4807 Hi-Temp Air Hose - Wire Reinforced

1" I.D.
4807 Hi-Temp Air Hose - Wire Reinforced
4807 Hi-Temp Air Hose - Wire Reinforced

1" I.D.
4807 Hi-Temp Air Hose - Wire Reinforced
4807 Hi-Temp Air Hose - Wire Reinforced

2" I.D.
4807 Hi-Temp Air Hose - Wire Reinforced
Inside Diameter
(I.D.) 		N/A 3/4 in19.05 mm N/A 3/4 in19.05 mm N/A 1 in25.40 mm N/A 1 in25.40 mm N/A 2 in50.80 mm
Outside Diameter
(O.D.) 		N/A 1.42 in36.00 mm N/A 1.42 in36.00 mm N/A 1.93 in49.00 mm N/A 1.93 in49.00 mm N/A 2.48 in63.00 mm
Reinforcement Spirals N/A 2
Maximum Working
Pressure at 68 ºF1 		N/A 41.37 bar600 psi
Minimum Bend Radius (MBR) N/A 8.30 in210.00 mm N/A 8.30 in210.00 mm N/A 11.00 in280.00 mm N/A 11.00 in280.00 mm N/A 22.00 in560.00 mm
Weight N/A 0.60 lbs/ft0.89 kg/m N/A 0.60 lbs/ft0.89 kg/m N/A 0.80 lbs/ft1.19 kg/m N/A 0.80 lbs/ft1.19 kg/m N/A 1.80 lbs/ft2.68 kg/m
Standard Length N/A 50 ft N/A 100 ft N/A 50 ft N/A 100 ft N/A 50 ft
Temperature Range N/A -40 to +135 ºC-40 to +275 ºF
Tube Material N/A High Heat Synthetic Rubber Hydraulic Oil Resistant
Cover Material N/A Ethylene Propylene Diene Monomer (EPDM)
Cover Color N/A Yellow
Branding N/A Jason logo 4807 HIGH HEAT WIRE AIR 275 ºF (+135 ºC) 600 PSI/41.4 BAR. Green mylar longitudinal stripe.
Design Factor N/A 3:1
Applications N/A For heavy-duty air supply where high-temperature is required. For use with high-temperature compressors without an after-cooler, mining, quarries, construction, industrial air placement, sandblasting and heavy-duty equipment.
Construction N/A Tube is a hydraulic oil mist resistant, high heat synthetic rubber. Cover is EPDM, yellow, pin-pricked. Reinforcement is a two-spiral wire.
Features N/A
  • Hydraulic oil resistant tube.
  • Bright yellow non-marking cover.
  • High working pressure.
  • Extreme heat resistance.
  • Abrasion and ozone resistant.
Note N/A All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.
California Proposition 65 Information N/A   This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • 1 Working pressure is temperature dependent.