Request Information
Construction: Tube is 1/4" NR/SBR blend, tan color. Cover is SBR/EPDM blend, fabric impression, corrugated and black. Reinforcement is a two-ply synthetic fabric with a wire helix and a static wire.

Application: For suction, discharge or gravity flow of abrasives from manufacturing, sandblast recovery, mineral processing power plants and spill recovery.

Features:
  • 1/4" gum tube is highly abrasion resistant
  • Corrugated to make the hose flexible, even in tight bends
  • Weather and ozone resistant
  • All sizes are full vacuum
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
Unit of Measure

Specifications

Inside Diameter
(I.D.)

 N/A 4 in101.60 mm

Outside Diameter
(O.D.)

 N/A 4.69 in119.13 mm

Reinforcement Plies

 N/A 2
Maximum Working
Pressure at 68 ºF1 		N/A 5.17 bar75 psi

Vacuum at 68 ºF

 N/A 29.0 inHg

Minimum Bend Radius (MBR)

 N/A 24.00 in609.60 mm

Weight

 N/A 2.93 lbs/ft4.36 kg/m

Standard Length

 N/A 100 ft

Temperature Range

 N/A -40 to +82 ºC-40 to +180 ºF

Tube Size

 N/A 1/4 in

Tube Material

 N/A Pure Gum Rubber

Tube Color

 N/A Tan

Cover Material

 N/A Ethylene Propylene Diene Monomer (EPDM) Styrene Butadiene Rubber (SBR)

Cover Color

 N/A Black

Branding

 N/A Jason logo 4470 DRY BULK SUCTION WP (PSI) (BAR). White mylar longitudinal stripe

Design Factor

 N/A 3:1

Applications

 N/A For suction, discharge or gravity flow of abrasives from manufacturing, sandblast recovery, mineral processing power plants and spill recovery.

Construction

Construction

 N/A Tube is 1/4" pure gum rubber, tan color. Cover is EPDM, fabric impression, corrugated and black. Reinforcement is a two-ply synthetic fabric with a wire helix and a static wire.

Features

Features

 N/A
  • 1/4" gum tube is highly abrasion resistant
  • Corrugated to make the hose flexible, even in tight bends
  • Weather and ozone resistant
  • All sizes are full vacuum
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.

Note

Note

 N/A All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.
Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice.

California Proposition 65 Information

California Proposition 65 Information

 N/A   This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • 1 Working pressure is temperature dependent.