Construction: Tube is ultra-high molecular weight polyethylene (UHMWPE). Cover is CR, smooth and black. Reinforcement is a two-ply synthetic fabric with a dual wire helix and two conductive copper wires.
Application: For the suction and discharge of bio-diesel and ethanol blended fuels.
Features:
Application: For the suction and discharge of bio-diesel and ethanol blended fuels.
Features:
- UHMWPE gives maximum resistance to today's bio-fuels
- Cover is resistant to weathering and abrasion
- Heat and ozone resistant
- Dual conductive copper wires makes it easy to ground the hose
- Safety Ohm (SΩ) ground more
Construction: Tube is ultra-high molecular weight polyethylene (UHMWPE). Cover is CR, smooth and black. Reinforcement is a two-ply synthetic fabric with a dual wire helix and two conductive copper wires.
Application: For the suction and discharge of bio-diesel and ethanol blended fuels.
Features:
Application: For the suction and discharge of bio-diesel and ethanol blended fuels.
Features:
- UHMWPE gives maximum resistance to today's bio-fuels
- Cover is resistant to weathering and abrasion
- Heat and ozone resistant
- Dual conductive copper wires makes it easy to ground the hose
- Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
- All sizes are full vacuum
Unit of Measure
Specifications
Inside Diameter
|
N/A 1-1/4 in31.75 mm |
Outside Diameter
|
N/A 1.68 in42.67 mm |
Reinforcement Plies |
N/A 2 Synthetic |
|
Maximum Working Pressure at 68 ºF1 |
N/A 10.35 bar150 psi |
Vacuum at 68 ºF |
N/A 29.0 inHg |
Minimum Bend Radius (MBR) |
N/A 7.00 in177.80 mm |
Weight |
N/A 0.62 lbs/ft0.92 kg/m |
Standard Length |
N/A 100 ft |
Temperature Range |
N/A -35 to +80 ºC-31 to +176 ºF |
Tube Material |
N/A Ultra-High Molecular Weight Polyethylene (UHMWPE) |
Cover Material |
N/A Chloroprene Rubber (CR) |
Cover Color |
N/A Black |
Branding |
N/A
Jason logo 4423 BIO-DIESEL B-20 MAX ETHANOL E-20 MAX SUCTION 150 PSI 10.35 BAR. Red mylar longitudinal stripe |
Design Factor |
N/A 3:1 |
Applications |
N/A For the suction and discharge of bio-diesel and ethanol blended fuels. |
Construction
Construction |
N/A
Tube is ultra-high molecular weight polyethylene (UHMWPE). Cover is CR, smooth and black. Reinforcement is a two-ply synthetic fabric with a dual wire helix and two conductive copper wires. |
Features
Features |
N/A
|
Note
Note |
N/A
Consult with engine manufacturers for warranted blends (B-5 to B-100 & E-5 to E-100). All sizes may not be stocked in all locations. We disclaim any liability for use of our products in applications other than which they are designed. Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice. For In-Plant or Tank Truck Use to Transfer Petroleum Products. |
California Proposition 65 Information
California Proposition 65 Information |
N/A
 This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
|
- 1 Working pressure is temperature dependent.
