Smooth Cover - Do not use with refined petroleum.
Unit of Measure

Specifications

Inside Diameter
(I.D.)

N/A 4 in101.60 mm

Outside Diameter
(O.D.)

N/A 4.57 in116.00 mm

Reinforcement Plies

N/A 2 Synthetic
Maximum Working
Pressure at 68 ºF1
N/A 150 psi10.35 bar

Vacuum at 68 ºF

N/A 29.0 inHg

Minimum Bend Radius (MBR)

N/A 17.70 in450.00 mm

Weight

N/A 2.29 lbs/ft3.42 kg/m

Standard Length

N/A 100 ft

Temperature Range

N/A -40 to +150 ºF-40 to +66 ºC

Tube Material

N/A Ethylene Propylene Diene Monomer (EPDM)

Cover Material

N/A Ethylene Propylene Diene Monomer (EPDM)

Branding

N/A Jason logo 4418 CRUDE OIL WASTE PIT SUCTION WP 150 Pounds per Square Inch (psi) 10.35 BAR.
Red mylar longitudinal stripe.

Applications

N/A Used for applications where full suction is required. Great for applications handling crude oil, salt and fresh water, tank bottoms and diesel fuels.

Construction

Construction

N/A Tube and cover are EPDM. Reinforcement is a two-ply synthetic fabric with a wire helix.

Features

Features

N/A
  • Weather and abrasion resistant.
  • All sizes are full vacuum.

Note

Note

N/A All sizes may not be stocked in all locations.
We disclaim any liability for use of our products in applications other than which they are designed.
Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice.
For In-Plant or Tank Truck Use to Transfer Petroleum Products.

California Proposition 65 Information

California Proposition 65 Information

N/A   This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • 1 Working pressure is temperature dependent.