Jason Industrial, Inc., A Megadyne Group Company - 4423 Bio-Diesel/Ethanol Suction and Discharge Hose

Construction: Tube is ultra-high molecular weight polyethylene (UHMWPE). Cover is CR, smooth and black. Reinforcement is a two-ply synthetic fabric with a dual wire helix and two conductive copper wires.

Application: For the suction and discharge of bio-diesel and ethanol blended fuels.

Features:

UHMWPE gives maximum resistance to today's bio-fuels
Cover is resistant to weathering and abrasion
Heat and ozone resistant
Dual conductive copper wires makes it easy to ground the hose
Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
All sizes are full vacuum

Request Information

Unit of Measure

Items	4423-0100-100 1" I.D. 4423 Bio-Diesel/Ethanol Suction and Discharge Hose	4423-0125-100 1-1/4" I.D. 4423 Bio-Diesel/Ethanol Suction and Discharge Hose	4423-0150-100 1-1/2" I.D. 4423 Bio-Diesel/Ethanol Suction and Discharge Hose	4423-0200-100 2" I.D. 4423 Bio-Diesel/Ethanol Suction and Discharge Hose	4423-0300-100 3" I.D. 4423 Bio-Diesel/Ethanol Suction and Discharge Hose
Inside Diameter (I.D.)	N/A 1 in25.40 mm	N/A 1-1/4 in31.75 mm	N/A 1-1/2 in38.10 mm	N/A 2 in50.80 mm	N/A 3 in76.20 mm
Outside Diameter (O.D.)	N/A 1.42 in36.00 mm	N/A 1.68 in42.67 mm	N/A 1.93 in49.00 mm	N/A 2.48 in63.00 mm	N/A 3.50 in89.00 mm
Reinforcement Plies	N/A 2 Synthetic
Maximum Working Pressure at 68 ºF¹	N/A 10.35 bar150 psi
Vacuum at 68 ºF	N/A 29.0 inHg
Minimum Bend Radius (MBR)	N/A 6.00 in152.40 mm	N/A 7.00 in177.80 mm	N/A 8.00 in203.20 mm	N/A 12.00 in304.80 mm	N/A 14.00 in355.60 mm
Weight	N/A 0.49 lbs/ft0.73 kg/m	N/A 0.62 lbs/ft0.92 kg/m	N/A 0.75 lbs/ft1.12 kg/m	N/A 1.16 lbs/ft1.72 kg/m	N/A 1.81 lbs/ft2.69 kg/m
Standard Length	N/A 100 ft
Temperature Range	N/A -35 to +80 ºC-31 to +176 ºF
Tube Material	N/A Ultra-High Molecular Weight Polyethylene (UHMWPE)
Cover Material	N/A Chloroprene Rubber (CR)
Cover Color	N/A Black
Branding	N/A Jason logo 4423 BIO-DIESEL B-20 MAX ETHANOL E-20 MAX SUCTION 150 PSI 10.35 BAR. Red mylar longitudinal stripe
Design Factor	N/A 3:1
Applications	N/A For the suction and discharge of bio-diesel and ethanol blended fuels.
Construction	N/A Tube is ultra-high molecular weight polyethylene (UHMWPE). Cover is CR, smooth and black. Reinforcement is a two-ply synthetic fabric with a dual wire helix and two conductive copper wires.
Features	N/A UHMWPE gives maximum resistance to today's bio-fuels Cover is resistant to weathering and abrasion Heat and ozone resistant Dual conductive copper wires makes it easy to ground the hose Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity. All sizes are full vacuum
Note	N/A Consult with engine manufacturers for warranted blends (B-5 to B-100 & E-5 to E-100). All sizes may not be stocked in all locations. We disclaim any liability for use of our products in applications other than which they are designed. Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice. For In-Plant or Tank Truck Use to Transfer Petroleum Products.
California Proposition 65 Information	N/A This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
¹ Working pressure is temperature dependent.

Catalog