4815 EPDM Steam Hose
Steam Hose
Warning! : Do Not Use Universal Couplings with Steam Hose
Construction: The tube and cover are EPDM. The cover is pin-pricked with fabric impression. Reinforcement is two plies of steel wire.
Application: For the conveyance of steam in chemical/petroleum, food, lumber, pulp and processing industries.
Features:
Construction: The tube and cover are EPDM. The cover is pin-pricked with fabric impression. Reinforcement is two plies of steel wire.
Application: For the conveyance of steam in chemical/petroleum, food, lumber, pulp and processing industries.
Features:
- High working pressure
- High temperature rating
- Cover is weather and ozone resistant
- Cover is pin-pricked to allow venting to eliminate blistering and cover separation
Unit of Measure
Items |
/Asset/a1571.jpg 4815-0050-050 1/2" I.D. 4815 EPDM Steam Hose |
/Asset/a1571.jpg 4815-0050-100 1/2" I.D. 4815 EPDM Steam Hose |
/Asset/a1571.jpg 4815-0075-050 3/4" I.D. 4815 EPDM Steam Hose |
/Asset/a1571.jpg 4815-0075-100 3/4" I.D. 4815 EPDM Steam Hose |
/Asset/a1571.jpg 4815-0100-050 1" I.D. 4815 EPDM Steam Hose |
|||||
Inside Diameter (I.D.) |
N/A 1/2 in12.70 mm | N/A 1/2 in12.70 mm | N/A 3/4 in19.05 mm | N/A 3/4 in19.05 mm | N/A 1 in25.40 mm | |||||
Outside Diameter (O.D.) |
N/A 1.00 in25.40 mm | N/A 1.00 in25.40 mm | N/A 1.25 in31.75 mm | N/A 1.25 in31.75 mm | N/A 1.50 in38.10 mm | |||||
Reinforcement Plies | N/A 2 Steel | |||||||||
Maximum Working Pressure at 68 ºF1 |
N/A 17.25 bar250 psi | |||||||||
Minimum Bend Radius (MBR) | N/A 5.90 in150.00 mm | N/A 5.90 in150.00 mm | N/A 8.30 in210.00 mm | N/A 8.30 in210.00 mm | N/A 11.00 in280.00 mm | |||||
Weight | N/A 0.40 lbs/ft0.60 kg/m | N/A 0.40 lbs/ft0.60 kg/m | N/A 0.51 lbs/ft0.76 kg/m | N/A 0.51 lbs/ft0.76 kg/m | N/A 0.67 lbs/ft1.00 kg/m | |||||
Standard Length | N/A 50 ft | N/A 100 ft | N/A 50 ft | N/A 100 ft | N/A 50 ft | |||||
Temperature Range | N/A Up to +232 ºCUp to +450 ºF | |||||||||
Tube Material | N/A Ethylene Propylene Diene Monomer (EPDM) | |||||||||
Cover Material | N/A Ethylene Propylene Diene Monomer (EPDM) | |||||||||
Branding |
N/A
Jason logo 4815 EPDM WP 250 PSI 17.25 BAR. DRAIN AFTER USE Reverse white mylar longitudinal stripe. |
|||||||||
Design Factor | N/A 10:1 | |||||||||
Applications | N/A For the conveyance of steam in chemical/petroleum, food, lumber, pulp and processing industries. | |||||||||
Construction | N/A The tube and cover are EPDM. The cover is pin-pricked with fabric impression. Reinforcement is two plies of steel wire. | |||||||||
Features |
N/A
|
|||||||||
Note |
N/A
All sizes may not be stocked in all locations. We disclaim any liability for use of our products in applications other than which they are designed. Hoses are constantly being upgraded. Jason Industrial reserves the right to make changes in construction without prior notice. WARNING: Do not use Universal Couplings with Steam Hose. |
|||||||||
California Proposition 65 Information | N/A This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/ | |||||||||
|