Construction: Tube is a nitrile blend. Cover is an NBR/PVC blend. Reinforcement is a 4-ply high-tensile synthetic textile with a single wire helix. Dual wire helix for 8", 10" and 12" I.D.'s. and has an anti-static copper wire.
Application: The transfer of drilling mud or crude oil. For use with petroleum products with aromatic content up to 50%
Features:
Application: The transfer of drilling mud or crude oil. For use with petroleum products with aromatic content up to 50%
Features:
- Cover is resistant to weathering and abrasion
- Tube is abrasion resistant
- 1" to 6", full vacuum
- Anti-static copper wire to ground the hose
- Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
Unit of Measure
Specifications
Brands |
N/A Jason |
Inside Diameter
|
N/A 4 in101.60 mm |
Outside Diameter
|
N/A 4.61 in117.09 mm |
Reinforcement Spirals |
N/A 4 |
Maximum Working Pressure at 68 ºF1 |
N/A 10.35 bar150 psi |
Vacuum at 68 ºF |
N/A 28.00 |
Weight |
N/A 2.62 lbs/ft3.90 kg/m |
Minimum Bend Radius (MBR) |
N/A 15.75 in400.00 mm |
Standard Length |
N/A 100 ft |
Temperature Range |
N/A -40 to +90 ºC-40 to +194 ºF |
Branding |
N/A Jason logo 4411 OILFIELD SUCTION AND DISCHARGE WP (150PSI) 10.35 BAR. Red mylar longitudinal stripe. |
Design Factor |
N/A 3:1 |
Applications
Applications |
N/A The transfer of drilling mud or crude oil. For use with petroleum products with aromatic content up to 50% |
Construction
Construction |
N/A Tube is a nitrile blend. Cover is an NBR/PVC blend. Reinforcement is a 4-ply high-tensile synthetic textile with a single wire helix. Dual wire helix for 8", 10" and 12" I.D.'s. and has an anti-static copper wire. |
Features
Features |
N/A
|
Warning
Warning |
N/A This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/ |
- 1 Working pressure is temperature dependent.