• 4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ
Construction: Tube is a nitrile blend. Cover is an NBR/PVC blend. Reinforcement is a 4-ply high-tensile synthetic textile with a single wire helix. Dual wire helix for 8", 10" and 12" I.D.'s. and has an anti-static copper wire.

Application: The transfer of drilling mud or crude oil. For use with petroleum products with aromatic content up to 50%

Features:
  • Cover is resistant to weathering and abrasion
  • Tube is abrasion resistant
  • 1" to 6", full vacuum
  • Anti-static copper wire to ground the hose
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Inside Diameter
(I.D.)

Outside Diameter
(O.D.)

Maximum Working
Pressure at 68 ºF

Minimum Bend Radius (MBR)

Standard Length

N/A 1-1/2 in38.10 mm N/A 1.93 in49.02 mm N/A 10.35 bar150 psi N/A 4.33 in110.00 mm N/A 100 ft
N/A 2 in50.80 mm N/A 2.48 in62.99 mm N/A 10.35 bar150 psi N/A 6.69 in170.00 mm N/A 100 ft
N/A 2-1/2 in63.50 mm N/A 2.99 in75.95 mm N/A 10.35 bar150 psi N/A 8.27 in210.00 mm N/A 100 ft
N/A 3 in76.20 mm N/A 3.50 in88.90 mm N/A 10.35 bar150 psi N/A 9.06 in230.00 mm N/A 100 ft
N/A 4 in101.60 mm N/A 4.61 in117.09 mm N/A 10.35 bar150 psi N/A 15.75 in400.00 mm N/A 100 ft
N/A 6 in1542.40 mm N/A 6.69 in169.93 mm N/A 10.35 bar150 psi N/A 26.57 in675.00 mm N/A 100 ft
N/A 8 in203.20 mm N/A 8.98 in228.09 mm N/A 10.35 bar150 psi N/A 40.35 in1025.00 mm N/A 20 ft
N/A 10 in254.00 mm N/A 11.10 in281.94 mm N/A 10.35 bar150 psi N/A 57.09 in1450.00 mm N/A 20 ft
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1