Request Information
Hose Ends are sleeve type couplings that fit over the OD of the sandblast hose. They are secured to the hose with wood screws. Countersunk holes on the hose end ensure that the screws fit correctly and will not be snagged while the hose is in operation. Within the ID of the hose end is a corkscrew ridge that helps to twist the coupling onto the hose and more importantly, helps to minimize the force of blow-back. Hose-to-hose or hose-to-pot connections are made by the 2 lug crowfoot design. No matter what the hose size, the 2 log hose ends interchange for common connections.
Unit of Measure

Specifications

Hose Inside Diameter
(I.D.)

 N/A 1-1/4 in

Hose Outside Diameter
(O.D.)

 N/A 2-5/32 in

Type

 N/A Hose End

Material

 N/A Aluminum

Note

Note

 N/A All sizes may not be stocked in all locations. Check with customer service for availability.
We disclaim any liability for use of our products in applications other than which they are designed.

California Proposition 65 Information

California Proposition 65 Information

 N/A   Brass products can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/