• Sandblast Hose Couplings
There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.
1 - 17 of 17 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Hose Inside Diameter
(I.D.)

Hose Outside Diameter
(O.D.)

Type

N/A 3/4 in N/A 1-1/2 in N/A Hose End
N/A 1 in N/A 1-7/8 in N/A Hose End
N/A 1-1/4 in N/A 2-5/32 in N/A Hose End
N/A 1-1/2 in N/A 2-3/8 in N/A Hose End
N/A 3/4 in N/A 1-1/2 in N/A Hose End
N/A 1 in N/A 1-7/8 in N/A Hose End
N/A 1-1/4 in N/A 2-5/32 in N/A Hose End
N/A 1-1/2 in N/A 2-3/8 in N/A Hose End
N/A 3/4 in N/A 1-1/2 in N/A Nozzle Holder
N/A 1 in N/A 1-7/8 in N/A Nozzle Holder
N/A 1-1/4 in N/A 2-5/32 in N/A Nozzle Holder
N/A 1-1/2 in N/A 2-3/8 in N/A Nozzle Holder
N/A 3/4 in N/A 1-1/2 in N/A Nozzle Holder
N/A 1 in N/A 1-7/8 in N/A Nozzle Holder
N/A 1-1/4 in N/A 2-5/32 in N/A Nozzle Holder
N/A 1-1/2 in N/A 2-3/8 in N/A Nozzle Holder
N/A N/A N/A
1 - 17 of 17 | Results Per Page | View | Unit of Measure
1