Jason Industrial, Inc., A Megadyne Group Company - Sandblast Hose Couplings

There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.

Unit of Measure

Items	Q1A Hose End Sandblast Hose Coupling	Q2A Hose End Sandblast Hose Coupling	Q3A Hose End Sandblast Hose Coupling	Q4A Hose End Sandblast Hose Coupling	Q1B Hose End Sandblast Hose Coupling
Description	N/A Hose Ends are sleeve type couplings that fit over the OD of the sandblast hose. They are secured to the hose with wood screws. Countersunk holes on the hose end ensure that the screws fit correctly and will not be snagged while the hose is in operation. Within the ID of the hose end is a corkscrew ridge that helps to twist the coupling onto the hose and more importantly, helps to minimize the force of blow-back. Hose-to-hose or hose-to-pot connections are made by the 2 lug crowfoot design. No matter what the hose size, the 2 log hose ends interchange for common connections.
Hose Inside Diameter (I.D.)	N/A 3/4 in	N/A 1 in	N/A 1-1/4 in	N/A 1-1/2 in	N/A 3/4 in
Hose Outside Diameter (O.D.)	N/A 1-1/2 in	N/A 1-7/8 in	N/A 2-5/32 in	N/A 2-3/8 in	N/A 1-1/2 in
Type	N/A Hose End
Material	N/A Aluminum	N/A Aluminum	N/A Aluminum	N/A Aluminum	N/A Quick End Brass
Note	N/A All sizes may not be stocked in all locations. Check with customer service for availability. We disclaim any liability for use of our products in applications other than which they are designed.
California Proposition 65 Information	N/A Brass products can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/