Construction: Tube is a nitrile blend. Cover is an NBR/PVC blend. Reinforcement is a 4-ply high-tensile synthetic textile with a single wire helix. Dual wire helix for 8", 10" and 12" I.D.'s. and has an anti-static copper wire.

Application: The transfer of drilling mud or crude oil. For use with petroleum products with aromatic content up to 50%

Features:
  • Cover is resistant to weathering and abrasion
  • Tube is abrasion resistant
  • 1" to 6", full vacuum
  • Anti-static copper wire to ground the hose
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
Request Information
Unit of Measure
Items
4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ

1-1/2 Inch (in) Inside Diameter (I.D.) 4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ
4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ

2 Inch (in) Inside Diameter (I.D.) 4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ
4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ

2-1/2 Inch (in) Inside Diameter (I.D.) 4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ
4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ

3 Inch (in) Inside Diameter (I.D.) 4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ
4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ

4 Inch (in) Inside Diameter (I.D.) 4411 Oilfield Suction and Discharge Hose - 150 PSI - SΩ
Brands N/A Jason
Inside Diameter
(I.D.) 		N/A 1-1/2 in38.10 mm N/A 2 in50.80 mm N/A 2-1/2 in63.50 mm N/A 3 in76.20 mm N/A 4 in101.60 mm
Outside Diameter
(O.D.) 		N/A 1.93 in49.02 mm N/A 2.48 in62.99 mm N/A 2.99 in75.95 mm N/A 3.50 in88.90 mm N/A 4.61 in117.09 mm
Reinforcement Spirals N/A 4
Maximum Working
Pressure at 68 ºF1 		N/A 10.35 bar150 psi
Vacuum at 68 ºF N/A 28.00
Weight N/A 0.75 lbs/ft1.11 kg/m N/A 1.06 lbs/ft1.58 kg/m N/A 1.37 lbs/ft2.04 kg/m N/A 1.81 lbs/ft2.69 kg/m N/A 2.62 lbs/ft3.90 kg/m
Minimum Bend Radius (MBR) N/A 4.33 in110.00 mm N/A 6.69 in170.00 mm N/A 8.27 in210.00 mm N/A 9.06 in230.00 mm N/A 15.75 in400.00 mm
Standard Length N/A 100 ft
Temperature Range N/A -40 to +90 ºC-40 to +194 ºF
Branding N/A Jason logo 4411 OILFIELD SUCTION AND DISCHARGE WP (150PSI) 10.35 BAR. Red mylar longitudinal stripe.
Design Factor N/A 3:1
Applications N/A The transfer of drilling mud or crude oil. For use with petroleum products with aromatic content up to 50%
Construction N/A Tube is a nitrile blend. Cover is an NBR/PVC blend. Reinforcement is a 4-ply high-tensile synthetic textile with a single wire helix. Dual wire helix for 8", 10" and 12" I.D.'s. and has an anti-static copper wire.
Features N/A
  • Cover is resistant to weathering and abrasion
  • Tube is abrasion resistant
  • 1" to 6", full vacuum
  • Anti-static copper wire to ground the hose
  • Safety Ohm (SΩ) ground wire embedded into the hose wall to help prevent the build-up of static electricity. SΩ wire must be secured to ground to dissipate static electricity.
Warning N/A   This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
Note N/A SΩ = Safety Ohm
All sizes may not be stocked in all locations. Check with customer service for availability.
We disclaim any liability for use of our products in applications other than which they are designed.
  • 1 Working pressure is temperature dependent.